Quick Answer: Do You Need A Pokewalker To Play HeartGold?

How do you use the pokewalker app?

Download the Android app, No Screen Off, and click on it once it’s installed to make sure your phone doesn’t go in to sleep mode.

Then download Smartphone Vibrations and use it to make your phone constantly vibrate…

How do you restart a Pokemon game?

Unfortunately, Pokemon games only allow a single save file on each game card. If you wish to start a new save file, you must clear your previously saved data first. To do this, Press UP + B + X at the Main Menu. You will be given confirmation notices before the data has been permanently deleted.

Can pokewalker be shiny?

It’s impossible to get shiny pokemon from the pokewalker.

Does pokewalker work with 3ds?

As the Pokewalker uses the game chip’s built-in infrared transmitter, not the DS’s wireless system, yes it will work.

How do you turn the pokewalker off?

It doesn’t turn off. It can only go to sleep mode unless you take the battery itself out.

How do you change the battery in a pokewalker?

Step 1 Battery. Locate the Screw on the Back of the Pokewalker. Add a comment. … Remove the Screw with a Phillips #0 Screwdriver. The screw is attached to the rear case with washers. … Remove the Rear Cover from the Device. Add a comment. … Use the flat end of a Spudger to Remove the Battery. Add a comment.

Does the pokewalker level up your Pokemon?

When you level up in the Pokewalker, it IS indeed like a Rare Candy level up, or a Daycare level up where you just gain a level rather than EVs. Keep in mind, the game will not give you your EVs right away, so If you see no difference or anything, don’t fret.

How do you turn on a pokewalker?

NOTE: The Pokéwalker does not have an ON/OFF switch and will turn on after you pull the plastic tab out of the battery compartment. It will enter Sleep Mode automatically when there is no button operation for 60–90 seconds (it will still be counting steps even in Sleep Mode).

How do I connect my pokewalker to Soulsilver?

Complete these stepsStart the game on the Nintendo DS.Select Connect to Pokéwalker from the Main Menu.Now select Save, then go for a Stroll. … After saving, you will be asked to select a Pokémon from your PC boxes to take for a stroll. … Next, you will choose the route you want your Pokémon to stroll on.More items…

Why is Pokemon Heartgold so expensive?

Pokémon games already have moderately high replay value and don’t drop in price despite being preowned, so this is double with HS/SS, and thus the high price, especially if it’s in mint condition and still has the poke walker included.

How do you reset pokewalker without DS?

Once the game has loaded, choose “Connect to Pokéwalker”. On the Pokéwalker menu, hold Down + X + L at the same time. When prompted, choose Connect on the Pokéwalker to erase the game data.

What is a pokewalker in HeartGold?

The Pokéwalker (Japanese: ポケウォーカー Pokéwalker) is a pedometer device specifically for use with Pokémon HeartGold and SoulSilver that is able to interact with the games in various manners.

Can you use any pokewalker?

From Bulbapedia: It is possible to use one game cartridge for multiple Pokéwalkers; however, only one Pokémon is allowed to stroll at one time. … Either Pokéwalker can now sync with the game and when the original Pokéwalker is connected for a stroll, the step count and original watt count should be restored.

Is the pokewalker region locked?

I found this on Bulbapedia, which seems to suggest that the Pokewalkers are indeed region free: It should also be noted that when a Pokéwalker is synced with a new game, the Pokéwalker will become the language the game is. … This suggests that very little data is stored on the Pokéwalker itself.

How do I get my pokewalker back?

You can get the pokemon back by pressing Up + Select + R on the connection screen.