Quick Answer: How Do I Put My Dualshock 4 In Pairing Mode?

How do I connect my Dualshock 4 to my phone?

To do this, your PlayStation 4 and PS4 controller must both be off.To set your PS4 controller to pairing mode, press and hold on the PS button and the Share button at the same time.

To pair your PS4 controller with your Android device, Bluetooth must be enabled on your Android.More items…•.

Where is the pairing button on a ps4 controller?

While the DUALSHOCK®4 and PS4™ are connected, press the PS button on the controller. You should hear a beep and the controller light should change from orange to white. This starts the pairing process. The light bar on the controller turns blue when properly paired.

Why is my ps4 controller not pairing?

A common solution is to try a different USB cable, in case the original one has failed. You can also try to reset the PS4 controller by pressing the reset button on the back of the controller, behind the L2 button. If your controller still won’t connect to your PS4, you might need to get support from Sony.

How do you reset your ps4 controller?

Reset the DS4 controller Locate the small reset button on the back of the DS4 near the L2 shoulder button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds. Connect the DS4 controller to the PS4 using a USB cable and press the PS button.

Why is my ps4 controller red?

If your controller is red and meets the condition of not being able to connect to your PS4, you are experiencing a USB issue where the back port doesn’t work anymore. Requiring you to buy a PS4 charging station that charges from the front port.

Why is my ps4 controller flashing white?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

How do I sync my Dualshock 4 to my iPhone?

Press the PlayStation button and the Share button and the same time and hold them down for a few seconds. The light on the back of your DualShock 4 should start flashing intermittently. On your iPhone or iPad, you should see “DUALSHOCK 4 Wireless Controller” pop up under Other Devices in the Bluetooth menu. Press it.

Why does my ps4 controller flash blue?

What Does the Blue Light Mean on PS4 Controller? If you see a blinking blue light on the PS4 controller, it means that the controller is trying to pair itself with the console. Fortunately, a blinking blue light on a PS4 controller does not mean you have dreaded blue light of death.

How do I connect my ps4 controller to my PC via USB?

Step 1: Connect your PS4 Controller via USB or Bluetooth Plug the smaller end of your micro-USB cable into the port on the front side of your controller (below the light bar). Plug the bigger end of your micro-USB cable into a USB port on your computer. The cable connection is completed.

How do you reconnect ps4 controller?

How to resync your PS4 controllerOn the back of your controller, find the tiny hole next to the L2 button. … Use a pin or paperclip to poke in the hole.Push the button on the inside for a couple of seconds and then release.Connect your DualShock 4 controller to a USB cable that is connected to your PlayStation 4.More items…•

How do you sync a ps4 controller without the USB?

Press and hold the PS and sharing buttons until the lightbar begins to strobe quickly (approximately 3-5 seconds). While it’s quickly double strobing, it’s in the pairing state like any other bluetooth device. If the strobe is a slow on and off, then the controller is trying to connect to your PS4 or PC.

How do I get my computer to recognize my ps4 controller?

What to do if PS4 Bluetooth controller isn’t working on Windows 10?Remove PS4 controller from Bluetooth devices. Make sure your controller has enough battery (above 10%), and then restart your PC. … Download and install the DS4Windows app to fix the PS4 controller driver error. … Pair your PS4 controller using DS4Windows.

How do you connect Bluetooth to ps4 controller?

To connect the PS4 controller via Bluetooth, press and hold the central PS Button and the Share button for three seconds until the lightbar at the top of the controller begins to flash. Next open up the Bluetooth settings on your PC.

When I press the PS button on my ps4 Controller nothing happens?

Hold the PS-button and Share-button simultanously for some seconds while the PS4 is turned on. This will reset all connections of the controller and searches for a new one. If this doesn’t help, try different USB-cables after resetting. If that also doesnt work, your controller is probably damaged.

Can you use the ps4 without a controller?

Sony’s official PlayStation app, available for both Android phones and iPhones, allows you to remotely control your PS4. Use it as a playback remote or a keyboard for quickly typing without relying on the PS4’s controller and on-TV keyboard.