Quick Answer: How Do I Sync My Ps4 Controller After Factory Reset?

Why is my ps4 controller not connecting?

A common solution is to try a different USB cable, in case the original one has failed.

You can also try to reset the PS4 controller by pressing the reset button on the back of the controller, behind the L2 button.

If your controller still won’t connect to your PS4, you might need to get support from Sony..

Is there another way to sync a ps4 controller?

On the PS4 controller, you wish to sync, hold down the PS button and the Share button simultaneously for 5 seconds. When the new controller appears in the list of Bluetooth device, select it with the other controller. The new controller will then be synced with your PS4.

Why does my ps4 controller flash blue?

What Does the Blue Light Mean on PS4 Controller? If you see a blinking blue light on the PS4 controller, it means that the controller is trying to pair itself with the console. Fortunately, a blinking blue light on a PS4 controller does not mean you have dreaded blue light of death.

Why is my ps4 controller flashing white?

The PS4 controller flashing white issue is generally caused by two reasons. One is because of the low battery, and that means that you need to charge your PS4 controller to make it back on track. The other reason is that your controller is trying to connect to your PlayStation 4, but failed due to unknown factor(s).

Can you connect DualShock 4 to ps4 without USB?

Press and hold the PS and sharing buttons until the lightbar begins to strobe quickly (approximately 3-5 seconds). While it’s quickly double strobing, it’s in the pairing state like any other bluetooth device. If the strobe is a slow on and off, then the controller is trying to connect to your PS4 or PC.

Why does my ps4 controller charge but not turn on?

Sometimes, a PS4 controller may malfunction due to a minor firmware glitch. To fix an issue like this, you need to reset the controller. To do this, you’ll have to press the tiny hardware reset button. You’ll need to use a bobby pin or toothpick to press the button inside a very small hole below the left trigger.

How do I relearn my ps4 controller?

Step 3 – Reset the DUALSHOCK®4 Controller Turn off your PS4™ and unplug it from the power source. Use a small, unfolded paper clip or something similar to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds and release. See the image below.

What do the ps4 controller lights mean?

The light bar on the controller is used to identify the player in the game. Player 1 is blue, player 2 is red, player 3 is green, and player 4 is pink. … For example, in Killzone: Shadow Fall, the light bar evolves into another color as the action heats up and the player takes damage, signifying that things are awry.

What happens when you reset your ps4 controller?

That is to say, it erases all data including apps, user profiles, and settings. The process to hard-reset PS4 controller is way too easy. All you need is to first turn off your console. The Reset button is located in a tiny hole at the back of the controller near the L2 button.

How do I reset my DualShock 4?

Reset the DS4 controller Locate the small reset button on the back of the DS4 near the L2 shoulder button. Use a small tool to push the button inside the tiny hole. Hold the button down for roughly 3-5 seconds.

How do I get my computer to recognize my ps4 controller?

What to do if PS4 Bluetooth controller isn’t working on Windows 10?Remove PS4 controller from Bluetooth devices. Make sure your controller has enough battery (above 10%), and then restart your PC. … Download and install the DS4Windows app to fix the PS4 controller driver error. … Pair your PS4 controller using DS4Windows.

How can I test my ps4 controller?

About This ArticleRight-click the Start logo.Click Control Panel to launch the app.Click View Devices and Printers.Right-click Wireless Controller.Click Game controller Settings.Click Properties.

How do I connect my ps4 controller after initialization?

To do so: Turn off your PlayStation 4. Locate the reset button on the back of your controller near the L2 shoulder button. Then use a small, unfolded paper-clip or something similar to push the button and hold it down for a couple of seconds. … Connect your controller to your PS4 console. Then turn your PS4 on.